Description
Special waterborne, single-component, polyurethane sealer recommended for improving water resistance. It is particularly indicated to be covered with OMEG-ART.
Packaging: 5L
Advantages
- Excellent tonalization (gives a warm effect to wood)
- Ideal for mixed 3-coat cycling and with high coverage
Specifications
Waterborne, single-component sealer GIOTTO
Composition | One-component |
---|---|
Based on: | Water |
Packaging | 5L |
Destination | Interior |
Rendement | 10-12m²/L |
Instructions
DIRECTIONS
Sand and fill the base, removing all wax, oil or existing finish. After final sanding or screening, vacuum and tack (with an antistatic cloth). Follow preferably the cycle below:
Apply 1 coat GIOTTO by roller, abrade (optionally), apply a second coat GIOTTO by roller, abrade or buff with fine-grained abrasive, finally apply 1 - 2 coats of one of our waterborne finishes.
For exotic woods it is recommended to test the sealer in advance on a small area, in order to verify if toning is as desired.
NOTICE
Do not apply at temperatures below 59° F. Allow the product to reach room temperature before application.
Always adhere to the prescribed recoating and abrading schedule. After abrading, always vacuum and tack thoroughly.
Clean tools with mild soap and water.
Protect from freezing!
Dispose of excess product and empty containers properly.
If the original unopened containers are stored in a cool dry place, the product will keep for 6 months.